I have had a few questions regarding the 22 vs. 22T Spindles, and I just wanted to set everything straight.
The 22 and 22T spindles have different bearing spacing that will not allow the 22 axle to fit in the 22T spindle. The 22T front wheel will hit the 22 spindle arm, ball stud, and steering ball cup, so the 22T wheel will not fit on the 22 spindle. I attached photos, with the part number as a caption.
22 Spindles:
Stock - TLR1061 - Plastic/composite molded spindles have 2mm of trail
 |
| TLR1061 |
Option 1 - TLR1062 - Plastic/composite molded spindles have 0mm of trail, otherwise referred to as "inline".
 |
| TLR1062 |
Option 2 - TLR1073 - Aluminum CNC Machined spindles with 2mm of trail.
 |
| TLR1073 |
 |
| TLR1075 |
22T Spindles:
Stock - TLR1103 - Plastic/composite molded spindles have 0mm of trail, otherwise referred to as "inline".
Stock - TLR1103 - Plastic/composite molded spindles have 0mm of trail, otherwise referred to as "inline".
 |
| TLR1103 |
Option 1 - TLR1109 - Aluminum CNC Machined molded spindles have 0mm of trail, otherwise referred to as "inline".
 |
| TLR1109 |
I hope that clears things up a bit!
Frank
