This week's TLR's blog post about putting the 5.0 steering rack on your 22T 4.0 comes from TLR driver Ean Reilley
It’s a very simple modification of the bulkhead as shown in the pictures, which can be easily done with a dremel. Make sure to keep checking the clearance so you don’t remove too much material, which would make the bulkhead weak. ￼Also, when doing this you need to make sure to use the 5.0 Ackerman Plates along with changing out your tunbuckles to 55mm length; same length as the 5.0 rear turnbuckles. The benefit of this modification is how smooth the steering is all the way throughout the corner and the ability to get a little more steering.
I would like to thank Ean for the post and good luck in your racing!
#22empire #8realm #DriveTLR