TLR 22-4 2.0 Low Profile Servo Installation

TLR 22-4 Low Profile Servo Installation 

Several drivers at the track have been asking how we run a low profile servo in the TLR 22-4…specifically the Spektrum S6240. Check out this video as Ryan Dunford takes you step by step through the easy process…and it only takes a couple of minutes.

https://www.youtube.com/watch?v=k3QFlvbuHNw

22-4 Shorty Pack Chassis Conversion

Hey Guys,

We've just started shipping TLR338002 which is the 22-4 Shorty Pack Conversion chassis.  We've had a few people ask, "What's that little black part for?"  I just wanted to help clear the air and give the detailed info on why we made it.

The right side battery strap on the 22-4 actually works as  the body mount as well, to hold the body up on the right side.  Since the right side battery strap is not used when running the shorty conversion chassis, we designed and made a tube that slides over the body post that basically acts as the body mount portion of the right side battery strap to support the right rear of the body.  See the image below.  Just slide the body clip through the lower hole as normal to hold the battery strap, and it will hold the body mount in place just the same.

I hope that makes it clear why this part in included, and now it can be installed without issue!

Race On!
Frank

22-4 Shorty Chassis Conversion Kit

 As the TLR Race Team continues to push the envelope of performance for the 22-4, they have found the weight distribution and overall balance of the 22-4 to be much better when running a “shorty” LiPo on the left side of the chassis and mounting the ESC on the right. This moves the weight a little more forward overall, improves the corner weight balance, and reduces the total weight by 75-100g (depending on the battery pack used). This new configuration is used on most all TLR 22-4 setups since mid-2014 including Ryan Maifield’s 2015 Reedy Race Champion setup. Designed as a direct replacement, no other parts are needed to convert to your 22-4!

Key Features

• Chassis is designed to fit a “shorty LiPo” without any modification to the chassis or mud guard
• Aluminum battery stop included allows for shorty pack to be mounted in the front or rear position
• Additional milling to chassis lowers the total weight by 18-20g
• An open pocket under the motor has proven to lower motor temperatures approximately 20-30 degrees Fahrenheit
• CNC Machined from 2.5mm thick 7075-T6 Aluminum
• Directly fits onto the 22-4 without the need for any other parts or modifications

Check out the link here on TLRacing.com TLR338002

You can also view the link from Horizon Hobby's website TLR338002 on HH.com 

3-Hole Pistons for the 22 Vehicles

Hello Racers!

TLR is happy to announce the release of 3-Hole 12mm Machined Pistons!  These pistons are offered in packs of 4, and with the hole diameters of 1.3mm and 1.4mm.  The TLR race team has had great success running the prototypes of these pistons on their 22 2.0 and 22-4 buggies and have dabbled with them on their 22T 2.0 and 22SCT 2.0's also.  Several key setups benefit from the reduced pack and quicker movement of the 3-Hole pistons, especially on tracks that are a little bumpier.  See some of the key setup links below.

The part numbers are TLR233017 for the 3x 1.3mm pistons, and the link to the TLR Site is here: http://www.tlracing.com/Search/Default.aspx?SearchTerm=TLR233017 

The part numbers are TLR233018 for the 3x 1.4mm pistons, and the link to the TLR Site is here: http://www.tlracing.com/Search/Default.aspx?SearchTerm=TLR233018

22 2.0 - Ryan Maifield Surf City Setup, 2014

22 2.0 - Ryan Maifield JC Fall Nats Setup, 2014

22 2.0 - Ryan Maifield Reedy Race Winning Setup, 2015

22 2.0 - Dustin Evans SC Showdown Setup for Slicks, 2014

Racer Tip - The popular 22-4 setups have all included the Split (2x1.4mm, 1x1.3mm) rear piston setup.  With the new 3x1.3mm pistons, there is now an easier way to get to this setup.  Just take a 3x1.3mm piston and drill out the two holes with a 1.4mm drill bit, and you're done.  A lot less work and now no need for a 1.3mm drill bit either.  Check out those setups below.

22-4 - Ryan Maifield Reedy Race Winning Setup, 2015

22-4 - Ryan Maifield Surf City Setup, 2014

We hope you enjoy these pistons as much as the team has! :)

Race On!
Frank

Ryan Maifield's Nitro Challenge Setup

Hello Racers - After his awesome weekend at Nitro Challenge which culminated in a Pro Nitro Buggy Championship, Ryan was kind enough to send over the setups from all of his podium finishes.

8IGHT 3.0 - http://www.tlracing.com/ProdInfo/Files/TLR04000-8IGHT%203.0%20Race%20Kit%20-%20Ryan%20Maifield,%20Nitro%20Challenge%20Winner.pdf

8IGHT-T 3.0 - http://www.tlracing.com/ProdInfo/Files/TLR04001-8IGHT-T%203.0%20Race%20Kit%20-%20Ryan%20Maifield,%20Nitro%20Challenge,%202015.pdf

8IGHT-E 3.0 - http://www.tlracing.com/ProdInfo/Files/TLR04002-8IGHT-E%203.0%20Race%20Kit%20-%20Ryan%20Maifield,%20Nitro%20Challenge,%202015.pdf


Give these great setups a try, and Race On!

Frank 

22-4 Castor Block Ball Stud Spacers

Hello Racers,

We have just announced the 22-4 Castor Block Ball Stud Spacers.  These help to fine tune the front roll center on the 22-4, but they do not interfere with the spindles like the regular ball stud spacers will.

The part number is TLR236005, and the link to the TLR Site is here:  http://www.tlracing.com/Products/Default.aspx?ProdID=TLR236005

TLR236005

Race On!
Frank

22T Mid-Motor Spoiler Mounting Tip!

Hello Racers,

We've gotten a great tip from Developer and Racer, Ryan Dunford.  He found a great way to mount the spoiler to the 22T Mid-Motor body.  This really helps add to the durability of the body and spoiler, and extend the life of both...

We have been running the 22T in mid motor configuration for some time now.  It works great this way and as tires get better and tracks get higher traction, we will assume many might start to try this.  One thing that can take some abuse is the spoiler that goes on the Mid Motor 22T body.  It can also get lost easily as it is normally mounted in place only using the body pins in the rear.

There is a simple fix for both of these problems.  It requires the following parts:

2 of M3 x 10mm Button Head Screws (TLR5903)

2 of M3 x 8 x .8mm Steel Washer (TLR6352)

2 of M3 x 5.5mm Lock Nut (TLR6313)

Install the two M3 x 10mm BH screws through the M3 steel washer through the spoiler and body.  Then add the M3 lock nut to the screw, but only tighten the nut until the screw just touches the spoiler and the nut just touched the body.  You do NOT want to tighten the screw/nut all the way down.  Check it out in the picture below.  Please understand this is one we modified after it had some wear and tear on it.

A couple hints when doing this come to mind.  Use washers on both sides for extra support.  Do it when the body and spoiler are new, before it takes abuse and the effect would even stronger.  Also, do not tighten the screws all the way down.  Tighten them just until they put pressure on the spoiler without deforming its shape.  This allow for some give when you end up upside down and also makes it so you do not press the spoiler down too far.

Hope this help your 22T mid-motor spoiler last longer!

Race On!
Frank